WD-309L Steel strip with pole cladding for stainless steel
Subclassification：
· Carbon Steel
Enquiry hotline：
- Product description
-
- Commodity name: WD-309L Steel strip with pole cladding for stainless steel
- Commodity ID: 1057228139978907648
WD-309L is mainly composed of low C-22Cr-12Ni, mainly used in the welding of transition layer in submerged arc welding and electroslag welding with poles
Standards：
JB/T4747 HD309L AWS A5.9 EQ309L EN12072 23 12L ISO 14343B-BS309L
Introduction：
WD-309L is mainly composed of low C-22Cr-12Ni, mainly used in the welding of transition layer in submerged arc welding and electroslag welding with poles; it can also be used for single layer forming overlay welding in heat exchangers and other occasions. High surfacing efficiency, low dilution rate of base material; beautiful weld channel formation. Smooth overlap fusion, low content of impurity elements in the overlay metal.
Applications：
It is widely used for overlay welding of hydrogenation equipment, nuclear vessels, urea equipment, offshore platform equipment, etc. in petrochemical industry.
Chemical composition reference value (%)：
C
Si
Mn
P
S
Cr
Ni
Mo
N
309L
0.015
0.35
1.8
0.015
0.001
21.2
11.3
0.01
0.035
Notice：
1. Before welding, it is strictly necessary to polish the base material to remove rust, oil and other factors affecting welding, and must be preheated.
2. When overlaying the transition layer, ensure that the weld channel forming premise as far as possible to reduce the transition layer overlay thickness (3-3.5 mm); When overlaying the corrosion resistant layer, ensure that the weld channel forming premise can be appropriate to increase the thickness of the corrosion-resistant layer (3.5-4 mm).
3. The use of flat characteristics of power shows better results.
4. The overlay welding position to the level to about 2 ° of the upper slope welding is appropriate.
Recommended welding parameters：
Recommended process specification parameters for submerged arc surfacing method
Welding tape size (mm)
Cladding current
(A)Cladding voltage
(V)Cladding speed
(mm/min)Band pole elongation
(mm)Flux thickness (mm)
Weld lap edge (mm)
Welding channel stack height (mm)
0.5*60
700-1000
28-32
140-220
30-40
-
1-8
3.0-5.0
0.4*50
550-800
28-32
140-220
30-40
-
4-8
3.0-5.0
Recommended process specification parameters for electroslag welding method
Welding tape size (mm)
Cladding current
(A)Cladding voltage
(V)Cladding speed
(mm/min)Band pole elongation
(mm)Flux thickness (mm)
Weld lap edge (mm)
Welding channel stack height (mm)
0.5*60
700-1000
24-30
140-220
30-40
20-30
5-12
3.0-5.0
0.4*50
550-800
24-30
140-220
30-40
15-25
5-12
3.0-5.0
Key words:- stainless steel
- Surfacing
- welding
CONTACT US
Mobile phone：13898363063
Copyright© 2023 Jinzhou Wonder Welding Material Co., Ltd. all rights reserved. SEO Business license
Powered by：www.300.cn jinzhou.300.cn