WD-SJ617 Sintering flux for submerged arc welding
Subclassification：
· Hard Surfacing
Enquiry hotline：
- Product description
-
- Commodity name: WD-SJ617 Sintering flux for submerged arc welding
- Commodity ID: 1057227722712768512
WD-SJ617 is the flux for electroslag overlay welding with electrode, fine powder particles, using flat characteristic DC power supply overlay welding.
Standards：
GB/T17854 F309L-H00Cr24Ni13 F316L-H00Cr19Ni12Mo2
Introduction：
WD-SJ617 is the flux for electroslag overlay welding with electrode, fine powder particles, using flat characteristic DC power supply overlay welding. The electroslag process is stable, showing fast slag removal, beautiful weld channel formation, and good fusion at the lap between the weld channels, with no carbon increase, less Cr burning loss. It is suitable for electroslag overlay welding with a width of 30~75mm.
Applications：
It can be used for overlay welding of corrosion-resistant stainless steel for nuclear vessels, hydrogenation reactors and pressure vessels, etc.
Flux chemical composition reference value(%)：
SiO2+TiO2
CaO+MgO
Al203+MnO
CaF2
S
P
10
10
20
55
≤0.06
≤0.08
Reference value of chemical composition of cladding metal (%)：
Welding tape C
Si
Mn
Cr
Ni
Mo
S
P
H00Cr24Ni13
≤0.04
≤1.0
≤2.5
18-21
9-11
≤2.0
≤0.03
≤0.03
H00Cr19Ni12Mo2
≤0.03
0.30-0.60
1.0-2.5
18-20
11-14
2.0-3.0
≤0.03
≤0.03
Notice：
1. The flux shall be baked at 300-350°C for 2 hours before use.
2. Rust, oil, water and other impurities should be removed from the welded parts before welding.
Key words:- Surfacing
- flux
- Weld bead
Previous page
CONTACT US
Mobile phone：13898363063
Copyright© 2023 Jinzhou Wonder Welding Material Co., Ltd. all rights reserved. SEO Business license
Powered by：www.300.cn jinzhou.300.cn