WD-SJ8011 Sintering flux for submerged arc welding
WD-SJ8011 Sintering flux for submerged arc welding

WD-SJ8011 Sintering flux for submerged arc welding

WD-SJ8011 is a fluoro-alkali type sintering flux with an alkalinity of about 2.6. The appearance is 10-60 mesh (2.0-0.28mm) yellowish-white round particles with a small loose-packing density

Subclassification：

· Hard Surfacing

电话

Enquiry hotline：

13898363063

Contact us
  • Product description
    • Commodity name: WD-SJ8011 Sintering flux for submerged arc welding
    • Commodity ID: 1057227774688583680

    WD-SJ8011 is a fluoro-alkali type sintering flux with an alkalinity of about 2.6. The appearance is 10-60 mesh (2.0-0.28mm) yellowish-white round particles with a small loose-packing density

    Standards：

    GB/T17854　　F410-H1Cr13

     

    Introduction：

    WD-SJ8011 is a fluoro-alkali type sintering flux with an alkalinity of about 2.6. The appearance is 10-60 mesh (2.0-0.28mm) yellowish-white round particles with a small loose-packing density, suitable for small welding current, and DC power is used for the current, with wire connected to the positive pole. Welding process performance is good, easy deslagging, beautiful forming, overlay metal has excellent resistance to intergranular corrosion performance and anti-brittle performance. Flux of the deposited metal for 13Cr system, with Cr13 series solid core wire, flux cored wire and H3Cr2W8 wire, etc., can be widely used in alloy steel, high alloy steel automatic welding and hard surface overlay welding, especially suitable for rollers and boilers and other easy to wear parts of the repair overlay welding.

     

    Applications：

    It can be used for overlaying continuous casting rolls, rolling mill rolls and feed rolls.

     

    Flux chemical composition reference value(%)：

    SiO2+TiO2

    CaO+MgO

    Al203+MnO

    CaF2

    S

    P

    15

    40

    20

    20

    ≤0.06

    ≤0.08

     

    Reference value of molten metal composition(%)：

    Welding wire

    C

    Si

    Mn

    Cr

    Ni

    Mo

    S

    P

    Cr13 core

    0.21

    0.45

    1.18

    11.73

    -

    -

    0.002

    0.024

     

    Hardness reference value：

    Matching wire

    Hardness (HRC)

    Flux cored wires such as 42S, 420, etc.

    48.2

     

    Notice：

    1. The flux shall be baked at 300-350°C for 2 hours before use.

    2. Rust, oil, water and other impurities should be removed from the welded parts before welding.

    3. Preheat 300-400℃ before welding.
     

    Key words:
    • flux
    • Welding wire
    • Surfacing

Previous page

WD-SJ617 Sintering flux for submerged arc welding

Next page

WD-SJ8015 Sintering flux for submerged arc welding