WD-SJ101D Sintering flux for submerged arc welding


WD-SJ101D is a kind of aluminum fluoro-alkali type sintering flux with alkalinity of about 1.6, the appearance of 10-60 mesh (2.0-0.28mm) gray spherical particles.

Subclassification:

· Low Alloy Steel


电话

Enquiry hotline:

Contact us
  • Product description
    • Commodity name: WD-SJ101D Sintering flux for submerged arc welding
    • Commodity ID: 20230110002

    WD-SJ101D is a kind of aluminum fluoro-alkali type sintering flux with alkalinity of about 1.6, the appearance of 10-60 mesh (2.0-0.28mm) gray spherical particles.

    Standards:

    GB/T5293  S43A2AF-SU26  S49A4AF-SU34  AWSA5.17  F6A0-EM12  F7A4-EH14  ISO 14174-SAAF1

     

    Introduction:

    WD-SJ101D is a kind of aluminum fluoro-alkali type sintering flux with alkalinity of about 1.6, the appearance of 10-60 mesh (2.0-0.28mm) gray spherical particles. The flux in the welding process shows advantages as follows: arc stability; easy deslagging; beautiful weld seam formation; pure deposited metal; has a high low temperature impact toughness. Welding can be used in both AC and DC, DC welding wire connected to the positive electrode.

     

    Applications:
    With appropriate welding wire (such as H08MnA, H10Mn2, H08MnMoA, H08Mn2MoA, etc.) , the flux can weld a variety of low-alloy structural steel, such as ship hulls, boiler pressure vessels, pipelines, etc. It is especially suitable for narrow gap welding priming welding, with superior slag removal performance.

     

    Flux chemical composition reference value(%):

    SiO2+TiO2

    CaO+MgO

    Al203+MnO

    CaF2

    S

    P

    7.4

    9.6

    44.2

    38.7

    0.012

    0.013

     

    Reference values for mechanical properties of molten metal:

    Mating wire

    Yield strength
    (MPa)

    Tensile strength
    (MPa)

    Elongation
    (%)

    KV2 (J)

    -20°C

    -40°C

    H08MnA

    375

    490

    35

    125

    -

    H10Mn2

    410

    505

    32

    -

    135

     

    Notice:

    1. The flux shall be baked at 300-350°C for 2 hours before use.

    2. Rust, oil, water and other impurities should be removed from the welded parts before welding.
     

    Key words:
    • wd-sj101d
    • welding
    • Welding wire
    • flux