PRODUCTS CENTER

WD-SJ101NQ Sintered flux for submerged arc welding
WD-SJ101NQ Sintered flux for submerged arc welding

Kenya WD-SJ101NQ Sintered flux for submerged arc welding

WD-SJ101 is a fluorine-alkali sintered flux with a basicity of about 2.2. It is a gray spherical particle with a particle size of 10-60 mesh (2.0-0.28mm).

Category:

Kenya· Low Alloy Steel

Phone:400-888-8888

Inquire

Product Description

Standards：
TB/T 2374  ISO 14174-S A FB 1

 

Introduction：
WD-SJ101 is a fluorine-alkali sintered flux with a basicity of about 2.2. It is a gray spherical particle with a particle size of 10-60 mesh (2.0-0.28mm). The deposited metal of the flux is pure, the weld seam is beautifully formed, and it is easy to remove the slag. It can be used for both AC and DC, and the wire is connected to the positive pole during DC welding.

 

Applications：
It can be used for atmospheric corrosion resistance welding of containers, railway rolling stock, etc.

 

Main Constituents

SiO2+TiO2

CaO+MgO

Al203+MnO

CaF2

S

P

22.2

29.6

31.8

16.2

0.021

0.022

 

Typical mechanical property of deposited metal

Matching wire
Matching wire

Yield strength
Yield strength
（MPa）

Tensile strength
Tensile strength
（MPa）

Elongation
Elongation
（%）

KV2（J）

-40℃

H10Mn2

440

540

32

115


Notice：
1.The flux must be baked at 300-350℃ for 2 hours before use.
2.Before welding, remove rust, oil, moisture and other impurities on the weldment.

previous page:

KenyaWD- SJ101Q Sintering flux for submerged arc welding

KenyaWD-SJ101C Sintered flux for submerged arc welding

: next page