PRODUCTS CENTER

WD-SJ101 Sintering flux for submerged arc welding
WD-SJ101 Sintering flux for submerged arc welding

Gambia WD-SJ101 Sintering flux for submerged arc welding

WD-SJ101 is a fluoro-alkali type sintering flux with an alkalinity of about 1.8. It has the appearance of gray-brown spherical particles of 10-60 mesh (2.0-0.28mm).

Category:

Gambia· Low Alloy Steel

Phone:400-888-8888

Inquire

Product Description

Standards：

GB/T5293　　S 43A2 FB-SU26　　S49A4 FB-SU34　　AWSA5.17　　F7A4-EH14　　ISO 14174-SAFB 1

 

Introduction：
WD-SJ101 is a fluoro-alkali type sintering flux with an alkalinity of about 1.8. It has the appearance of gray-brown spherical particles of 10-60 mesh (2.0-0.28mm). The flux in the welding process shows advantages as follows: arc stability; easy deslagging; beautiful weld seam formation; pure deposited metal; has a high low temperature impact toughness. Welding can be used in both AC and DC, DC welding wire connected to the positive pole.

 

Applications：
With appropriate welding wire (such as H08MnA, H10Mn2, H08MnMoA, H08Mn2MoA, etc.) can weld a variety of low-alloy structural steel, such as ship hulls, boiler pressure vessels, pipelines, etc. It can be used for multi-layer welding, double-sided single-pass welding, multi-wire welding and narrow gap submerged arc welding.

 

Flux chemical composition reference value (%)：

SiO2+TiO2

CaO+MgO

Al203+MnO

CaF2

S

P

19.4

33.8

23.6

23.1

0.026

0.028

 

Reference values for mechanical properties of molten metal：

Mating wire

Yield strength
(MPa)

Tensile strength
(MPa)

Elongation
(%)

KV2 (J)

-20°C

-40°C

H08MnA

385

500

35

130

-

H10Mn2

420

520

32

-

115

H08MnMoA

495

575

22

120

-

H08Mn2MoA

635

765

30

65

-

 

Notice：

1. The flux shall be baked at 300-350°C for 2 hours before use.

2. Rust, oil, water and other impurities should be removed from the welded parts before welding.
 

previous page:

Gambianone

GambiaWD-SJ101D Sintering flux for submerged arc welding

: next page