PRODUCTS CENTER

WD-SJ101G Sintering flux for submerged arc welding
WD-SJ101G Sintering flux for submerged arc welding

Brunei WD-SJ101G Sintering flux for submerged arc welding

WD-SJ101G is a fluoro-alkali type sintering flux with alkalinity of about 1.7. It has the appearance of gray-black spherical particles of 10-60 mesh (2.0-0.28mm).

Category:

Brunei· Low Alloy Steel

Phone:400-888-8888

Inquire

Product Description

Standards：

GB/T5293　　S49 A4 FB-SU34　　AWS A5.17　　F7A4-EH14　　ISO 14174-S A FB 1

 

Introduction：

WD-SJ101G is a fluoro-alkali type sintering flux with alkalinity of about 1.7. It has the appearance of gray-black spherical particles of 10-60 mesh (2.0-0.28mm). The flux in the welding process shows advantages as follows: arc stability; easy de-slagging; beautiful weld seam formation; pure deposited metal; has a high low temperature impact toughness. Welding can be used in both AC and DC, DC welding wire connected to the positive pole.

 

Applications：
Combined with appropriate welding wire (such as H08MnA, H10Mn2, H08MnMoA, H08Mn2MoA, etc.), it is mainly used in pipeline welding. It is suitable for the welding of straight seam and spiral pipeline, and can meet the industry standard of X70 and X80 steel pipes. It has good low temperature toughness at -40℃.

 

Flux chemical composition reference value(%)：

SiO2+TiO2

CaO+MgO

Al203+MnO

CaF2

S

P

20.5

32.4

21.5

25.6

0.026

0.028

 

Reference values for mechanical properties of molten metal：

Mating wire

Yield strength
(MPa)

Tensile strength
(MPa)

Elongation
(%)

KV2 (J)

-20°C

-40°C

H10Mn2

425

535

32

-

128

H08MnMoA

495

575

22

120

-

H08Mn2MoA

635

765

30

65

-


Notice：

1. The flux shall be baked at 300-350°C for 2 hours before use.

2. Rust, oil, water and other impurities should be removed from the welded parts before welding.
 

previous page:

BruneiWD-SJ101D Sintering flux for submerged arc welding

BruneiWD- SJ101Q Sintering flux for submerged arc welding

: next page