WD-SJ8600 Sintering flux for submerged arc welding


WD-SJ8600 is an aluminum-alkali type sintering flux with an alkalinity of about 1.2. It has the appearance of gray spherical particles of 10-60 mesh (2.0-0.28mm).

Subclassification:

· Low Alloy Steel


电话

Enquiry hotline:

Contact us
  • Product description
    • Commodity name: WD-SJ8600 Sintering flux for submerged arc welding
    • Commodity ID: 1057227571822682112

    WD-SJ8600 is an aluminum-alkali type sintering flux with an alkalinity of about 1.2. It has the appearance of gray spherical particles of 10-60 mesh (2.0-0.28mm).

    Standards:

    GB/T5293  S49A4AB-SU34  AWSA5.17  F6A2-EM12  F7A4-EH14  ISO 14174-SAAB1

     

    Introduction:

    WD-SJ8600 is an aluminum-alkali type sintering flux with an alkalinity of about 1.2. It has the appearance of gray spherical particles of 10-60 mesh (2.0-0.28mm). This flux has good moisture absorption resistance; high particle strength; small loose packing density; low flux consumption during welding. The flux has advantages as follows: the maximum welding current of the flux in the welding process can reach 1000A, and has arc stability; easy slag removal; beautiful weld seam formation; pure deposited metal; high low temperature impact toughness. When DC welding, the wire is connected to the positive pole. With the appropriate wire can be welded with a variety of low-alloy steel structures, when welding boiler mode water-cooled wall, welding speed can up to 70m / h or more, especially suitable for welding thin plate high-speed and thick plate narrow bevel, narrow gap and other structures.

     

    Applications:

    It can be used for boiler water-cooled wall, I-beam, box beam and other steel structures.

     

    Flux chemical composition reference value(%):

    SiO2+TiO2

    CaO+MgO

    Al203+MnO

    CaF2

    S

    P

    12.5

    28.5

    39.6

    18.6

    ≤0.04

    ≤0.06

     

    Reference values for mechanical properties of molten metal:

    Mating wire

    Yield strength
    (MPa)

    Tensile strength
    (MPa)

    Elongation
    (%)

    KV2 (J)

    -20°C

    -40°C

    H08MnA

    ≥360

    450-550

    ≥22

    ≥34

    -

    H10Mn2

    ≥400

    480-650

    ≥24

    ≥60

    ≥34


    Notice:
    1. The flux shall be baked at 300-350°C for 2 hours before use.
    2. Rust, oil, water and other impurities should be removed from the welded parts before welding.

    Key words:
    • flux
    • welding

Previous page

Next page